Why Won’t My Garage Door Close? Faults and Solutions
Sometimes our garage door does not work properly and we face many issues like opening and closing it. There are different ways and factors that we can operate to solve these issues. Ignoring these kinds of problems can cause side effects to our door with home security.
If you want to avoid future complications then must do regular checking of your garage door system with a specialist of garage door installers Calgary, you can also make a decision for garage door replacement. Most common and basic problems with automatic garage doors are open and closed. So, in this article we explain different tips and by following them your garage door will never make any problem.
It should be noted that an automatic garage door (whether for a commercial premises or a factory) is made up of a series of mechanical parts that require good maintenance.
In most cases, if you notice when the garage door does not close completely, it is because it hasn’t been adequately maintained. The owner of the automatic door can perform maintenance work but it is advisable to choose a company which specializes in automatic door maintenance.
When those who would buy the automatic door are advised to ask for automatic doors and automatic door motors that have the CE Mark. The products have been subjected to strict quality controls.
Below are the most common problems that automatic doors present when they do not close:
- The garage door does not close completely due to the photocell: The photocell is most likely dirty and stops abruptly when it detects an obstacle.
- The door stops at a short distance from the ground or even returns to its natural position: This happens when the so-called anti-crushing cells detect an obstacle and stop immediately, this in the case of a child or an elderly person passing through. This problem is solved by passing a clean cloth through the “electric eye”.
- Leaves, insects, stones or anything else are often deposited on sliding doors that face outside, which prevents the door from closing properly.
- One of the reasons why the garage door does not close completely is the wear and tear of the pulleys. In this case, it is recommended to call a specialist to align or replace the pulleys.
- Another cause is when a track is bent, which can cause the garage door to not open or close. In this case, the track must be straightened, adjusted or replaced.
To avoid the problems mentioned above, it is best to carry out regular maintenance or hire a specialized company for this purpose.
Common Faults In Automatic Garage Doors
The continuous use of automatic doors to enter or exit the residential home is prone to daily wear and tear on the automatic door components. This results in the automatic door having functional problems from time to time.
It should be noted that when a garage door does not open or close properly, the problem could be with certain electrical and mechanical components. If you do not have the knowledge to solve the problem, it is advisable to call a professional in the field.
Below are the most common reasons why garage doors do not open or close normally:
- The sensor is blocked, dirty or misaligned
- The operator does not receive power
- The transmitter batteries are dead
- The garage door torsion is broken or extension springs
- The cables are pinched or broken
- Sensitivity is out of adjustment
- The remote signal is blocked
- The limit setting is incorrectly adjusted
- The door track is misaligned
- A small obstacle is present
- The engine has been disabled
- Lock mode has been inadvertently activated
- The door has been manually closed
- The gear is stripped on the opener
- The keyboard is not synchronized
Hire Garage Door Installers Calgary For Our Door Problems and Installations
If you are in search of trusted and professional garage door installers than no look further and give a chance to our number one company of garage door installers Calgary. Our professional team will check your all door faults and will let you know what will be the best solution.
