Don’t Let A Faulty Pool Pump Ruin Your Summer Fun!
One of the most important parts of a swimming pool is the pump, which constantly circulates water to keep your pool clean and sanitary without you needing to lift a finger! Pumps do fail sometimes, though, and if you’re not prepared it can cause damage to your pool and make you lose money in repairs and lost use of your pool over the summer. Here are some things to look out for with your pool pump that could indicate it’s on its way out.
What is a Pool Pump?
A swimming pool pump is what circulates water through your filtration system and then through your filter cartridge. The purpose of filtration is to filter out any debris or impurities that make their way into your pool. Pool pumps are designed to be very durable to endure all kinds of weather and last for several years, even decades if you take care of them well.
If you have noticed recently that there’s something wrong with how it’s running, however, it could mean there’s something wrong with either its motor or something else important component such as a belt.
Why does it break down?
Pool pumps are high-demand equipment that operates outdoors and consistently expose themselves to all elements. As you might expect, wearing parts can lead to breakdowns and malfunctions. In most cases, it’s not a matter of if your pump will go out; it’s when. How you respond can make all the difference in whether you’re left cooling off in an empty pool or lounging on your patio as cool waters flow over you on a hot day. The following are some maintenance tips to help keep your current motor running longer
What are common problems and how to fix them?
It’s summertime and for many of us, that means lots of time by or in pools, so it’s important to keep things running smoothly. Having a swimming pool is great fun, but it can also be a big responsibility. If you’re having trouble with one of your pumps or other equipment, here are some quick tips on how to get back up and running quickly.
- Using these ideas as jumping off points for diagnosing your issuances is good that if you’re having problems with your pool equipment, there’s an easy fix. Let’s take a look at three common problems and their solutions: Pump won’t start: The most likely cause of a problem starting your pump is low voltage or current. Pool pumps run best when plugged into outlets protected by a ground fault circuit interrupter (GFCI).
- The GFCI should trip immediately if something causes current to leak into the water—for example, wet hands touching an outlet while using a hair dryer—which could lead to electrocution and serious damage. Make sure your GFCI has been tested within the past year; don’t test it yourself since improper use could cause electrocution hazards and property damage; call an electrician instead (preferably one who works on pools).
When should you replace it?
If you’re experiencing problems with your pump, there are steps you can take to get it running smoothly again. However, if these solutions don’t work, it might be time to install a new one. Pool pumps usually last anywhere from three to eight years depending on how much use they get and how well they’re taken care of.
If it looks like something is amiss or if it starts running louder than usual or stopping completely for long periods, then consider buying a new one and installing it in place of your old model. You might also want to think about replacing older pumps that aren’t working properly with new ones just so you know that everything is up-to-date.
How do you know if it needs replacing?
If you hear loud banging or grinding noises coming from your pump, or if it is leaking, it’s probably time to replace it. The best thing to do is to call in a licensed professional to replace it for you.
If your pool has two pumps, and one of them needs replacing, consider replacing both at once. While installing two new pumps can be more expensive than just fixing one of them, having two new pumps will extend their life by several years, which offsets that initial investment.
Finally, keep an eye on leaves and other debris floating in and around your swimming area during peak seasons: these things can clog up drains and filters quickly, making them much harder (and expensive) to fix later on down the road.
Pool Pump Maintenance Tips
Get Your Pool Pump Ready for Summer: Time to pack up those towels and put away those sunscreen bottles for another year? Not so fast. If you live in a home with an inground swimming pool, then it’s time to start planning for swim season—and winterizing is always part of that process. This year, consider these tips for keeping your pool equipment in peak condition and getting ready for some fun in what is certain to be another busy summer.
Pool Pump Service Kit – Needed or Not?
If you notice that your spa or pool isn’t heating up, it might be time to replace some parts. There are two main types of materials used in pumps: plastic and metal. While plastic is more likely to crack, metal can corrode after long periods of use. If you have a lot of metal parts in your pump and an algae bloom occurs, then it’s probably time for an overhaul.
When you begin shopping for replacement parts, make sure to look into service kits as well – these pre-packaged assortments give you everything you need to replace worn or broken components at once so they don’t lead to further damage.
Conclusion
Of course, getting an early start on a new project will help make sure you don’t have to worry about it later. That way, you can have all of next season to enjoy time by the pool with family and friends. So why not get started now? And if there is any chance you’ll need some professional installation help for one of these projects or any other jobs around your home, head on over to Mr Pool Man. They provide high-quality services at competitive prices and can save you time by doing all of the work themselves instead of outsourcing everything. There’s no sense in trying to do it yourself when someone else is ready and able to do it right. As they say: when life gets busy, call in The Pro!
